Fix Automatic repair couldn’t repair your pc On Windows 10

Most of Windows users Report After Upgrade to windows 10 Anniversary update, Recent windows update installation or even after New Hardware device driver Installation, Windows Stuck At the startup repair screen for a long time, while Start windows Laptop or computer. Even after hours repair this will results Automatic repair couldn’t repair your PC. Or windows 10 automatic repair your pc did not start correctly  Also for Windows 7 users this error will be Startup Repair couldn’t repair your pc. Startup Repair or Automatic Repair both are the same Windows Recovery Utility tool but named differently according to the Windows Version.

The error could be like: Automatic Repair couldn’t repair your PC.
Press “Advanced options” to try other options to repair your PC or “Shut down” to turn off your PC.
Log file: C:\WINDOWS\System32\Logfiles\Srt\SrtTrail.txt

- Advertisement -

Automatic Repair is a built-in Windows 10 service, which has the ability to fix the boot failure error. When Windows 10 running system fails to boot, the Automatic Repair option tries to repair and fixes the bugs that is preventing Windows to run properly. In most cases, automatic repair fixes various issues related to boot failures but like any other program, it also has its limitations and sometimes Automatic Repair fails to work. Most of the time Automatic Repair fails because there are some errors or corrupted or missing files in your operating system installation that prevent Windows from starting correctly. In this cause you have to manually fix these errors to fix the startup problem include Automatic repair couldn’t repair your pc.

How To Fix Automatic Repair couldn’t repair your pc Error

So If you are also suffering with this problem and looking for the solution to fix it permanently. Here fallow bellow we have some solutions which help to fix this problem permanently.

Remove All External Devices

First of all start with basic troubleshooting, Remove all external devices include power cable and VGA cable. Now press and hold the power button for 30 sec. Now Attach only the power cable, VGA cable, keyboard and mouse and start windows and check windows starts normally. If yes then maybe a problem with any of external devices like an attached printer, scanner, external HDD etc. Insert one by one and find out the device which causes a problem. Uninstall the current driver for that particular device. Visit the manufacturer’s website and download the latest driver and install it.

For Laptop, users Remove the Battery and hold the Power button for 30 sec. Again insert the battery and check its working.

Access Advanced Start Options

If the Above method not working and facing the same problem Automatic repair couldn’t repair your pc. Then you can Access the windows 10 Advanced options ( where you get a number of troubleshooting tools like advanced command prompt. system restore, Automatic repair, windows startup settings include safe mode etc. ) to fix this startup problem.

Also You can Refer bellow video to know more about Advanced boot options.

First Click on Advanced Options as shown below image to access the advanced boot options. (Or you can use a windows installation media to access the Advanced boot options: check how to access advanced boot options using installation media)

Now on the next screen you will get a screen to choose an option here click on Troubleshoot – > Advanced options -> Now click on command prompt. Here on command prompt type bellow commands to fix this problem.

Perform Commands to Fix Automatic repair couldn’t repair your pc error

First, type command Diskpart And hit the Enter key to execute the command. Next type List Volume to display the volume list.

The above listed commands help you to find out the Windows Drive Letter that is going to require treatment. This is essential to understand the part of our windows Drive Letter that requires the troubleshooting process.

Here Note down your windows installation volume for me its volume 2 and the drive letter is D ( check the bellow picture for better understand )

After that Type Exit to leave the diskpart.

Again Perform Bellow commands to fix :

Frist Type D: ( Note your driver letter may different ) and hit the enter key.

Next Type bootrec.exe /fixmbr hit enter to execute the command and fix the master boot record.

After that type bootrec.exe /fixboot hit to fix the boot device-related problem.

Now Use command bootrec.exe /rebuildbcd and hit enter to execute the command. next type exit.

Repair Bed Sectors And Errors on Hard Disk

After fix the Boot MBR check the hard disk for errors. Sometimes corrupted files on your hard drive can cause these types of errors to appear, but you can fix these errors by performing chkdsk scan. To perform this scan, Type : chkdsk /f /r

Choose “Y” for yes for the question concerning would you like to force a dismount on this volume (Y/N)  when you press Y key this will show volume dismounted app opened handles to this volume are now invalid. and the scanning process will start wait until stage 5 complete. This process will take some time wait for that. After complete the scanning process, you will got a screen as shown below.

Now Type command Exit to exit the command prompt and when the advanced screen appears click on turn off your pc. Now check if these commands helped to fix Automatic Repair couldn’t repair your PC error on Windows 10.

Boot Into Safe mode

If after perform All Above commands and repair Disk errors still having same issue windows unable to start with Error like  Automatic repair couldn’t repair your PC. Then Boot windows into safe mode. Where windows start with minimal system resources. And allow you to perform Troubleshooting Steps to Fix this startup problem.

Run System file Checker

As windows unable to start and automatic repair unable to fix the issue, may there any corrupted, missing system file causing the issue or any Corrupted Device driver, third party application cause this issue. that cause you need to run the System file checker utility to make sure any corrupted system files not causing the issue. Also, open Device Manager and check any installed device driver with a yellow tingle mark if found any simply right click and select uninstall. Also Disable or uninstall the current Display driver, on the next boot windows automatically install the best available Display driver for you.

Disable Fast Startup

Also if this error occurs on the window computer then disable the fast startup Feature is a very effective solution to fix most windows startup problems. you Can read the advantages and disadvantages of the Fast startup Feature here.

You can Disable fast Startup Feature from the control panel -> power options -> choose what the power buttons do -> change settings that are currently unavailable and uncheck the fast startup option as shown below image.

After performing above steps ( Run System file checker, Driver reinstall and Disable Fast startup ) Now Restart windows check this time windows Start normally without any problem

Rename corrupt Windows Registry

Most of the time above methods fix this Automatic repair couldn’t repair your pc error. If still your pc not start normally after repair MBR check HDD error etc then rename the old corrupt registry and create new registry can fix this problem to do this

First Insert the Windows installation media, press the Power button, press del key to access the BIOS setup. Here set first boot option CD/DVD press f10 to make save changes Now when windows start click any key to boot from CD or DVD

  • Next Select your language and click on Next.
  • Here on the keyboard press Shift + F10 to open Command Prompt.
  • Next on command prompt Type cd C:\windows\system32\logfiles\srt\ (change your drive letter accordingly).
  • Here, type SrtTrail.txt and press Enter to open the required file in the notepad. Next click on file and select open.
  • Next Find File types and select All Files.

Navigate to C:\windows\system32, find CDM, right-click it and select Run as Administrator.

Type cd C:\windows\system32\config command in the command prompt window.

Add .bak file extension to Default, Software, SAM, System and Security files to create their backups. To do so, type the following command in the command prompt window and press Enter after each:

  • First type rename DEFAULT DEFAULT.bak and hit the enter key
  • Then type rename SAM SAM.bak and hit the enter key
  • next type rename SECURITY SECURITY.bak and hit the enter key
  • Again type rename SOFTWARE SOFTWARE.bak and hit the enter key
  • At last type rename SYSTEM SYSTEM.bak and hit the enter key.
  • Now type copy c:\windows\system32\config\RegBack c:\windows\system32\ and hit enter key close command prompt.
  • remove installation media and reboot your PC. I hope this time pc starts normally.

Perform System Restore

Also if the above methods fail to fix then you can use system restore option on advanced boot options to revert back system setting to the previous working state. where the system working without any errors.

Also you can Run SFC Utility ( system file checker utility ) on command prompt to repair any corrupted system files. To do this same on advanced options command prompt type sfc /scannow and hit the enter key. wait until 100 % complete after that restart windows and check.

These are some best working solutions to fix windows 10 startup problems include Automatic Repair couldn’t repair your PC, windows 10 automatic repair your pc did not start correctly or startup repair couldn’t repair your pc srttrail.txt windows 10 error. Hope after performing these steps your problem will be get solved and windows start normally. Still have any query, suggestion, feel free to comment below.

Also read:

Steve Ballmer
With over 7 years of experience in the IT industry, I have experience in IT support, helpdesk, sysadmin, network admin, and cloud computing. Certified in Microsoft Technologies (MCTS and MCSA) and also Cisco Certified Professional in Routing and Switching.

NordVPN Birthday Deal

2-Year plan: 67% off + 3 Months FREE

30-day money-back guarantee

Exit mobile version