Laptop won’t start after Windows 10 update. Getting error code 0xc0000225, your pc needs to be repaired (A required device isn’t connected or cannot be accessed). The most common cause of the error code 0xc0000225 is the Boot Configuration Data BCD file has become missing or corrupt.
Also sometimes system files are corrupted, faulty hardware device or driver confliction results Error Code 0xC0000225 Your PC needs to be repaired, A required device isn’t connected or can’t be accessed Or An unexpected error has occurred.
For some Other users, the error code will different like
- 0xc000000f – An error occurred while attempting to read the boot configuration data
- 0xc000014C – The Boot configuration data for your PC is missing or contains errors
- 0xc0000225 – Boot selection failed because a required device is inaccessible
- 0x0000098, 0xc0000034 – Boot Configuration Data file missing required information or does not contain a valid OS entry.
So If you are also struggling with this error code 0xc0000225, Unable to boot Windows normally. here are some effective solutions to apply.
Fix Error Code 0xC0000225 in Windows 10
Disconnect all peripheral devices from the computer except the keyboard and the mouse. Restart Windows, and check if this may fix the problem if the device driver compatibility issue causing the problem.
Since Windows fails to start normally, You need to use installation media, such as a USB flash drive, or a disc, to proceed some of the following methods. If you don’t have one, here is how to create Windows 10 installation media.
Windows 10 startup repair
- Insert your installation media, (USB flash drive, or a DVD). Then restart your computer.
- Access BIOS setup using F2 or Del key then change first boot from removable Disk or DVD
- Press F10 and yes to make save changes and restart the PC
- Now the System starts from the installation media “Press any key to boot from CD or DVD“.
- Confirm your language options, then click Next.
- When you see the Install Now screen, click the Repair your computer link in the bottom-left instead.
- Select Troubleshoot then Advanced options.
- Click Automatic Repair.
- This will restart the window and during startup, this will start to diagnose your system.
- During this diagnostic phase, Startup Repair will scan your system and analyze the various settings, configuration options, and system files as it looks for corrupt files or botched configuration settings.
- Let the process go through, then restart your computer when it’s done.
- If error code 0xc0000225 doesn’t pop up, you’ve fixed the issue!
Repair Corrupt boot Volume (MBR)
If Windows’s automatic repair didn’t work, try to rebuild Boot Configuration Data file from Command Prompt.
- Boot from your Windows 10 installation media and open the Advanced options menu.
- choose Command Prompt to open a command line interface.
- Diskpart
- List volume
Note down your Windows installation volume
Now type Exit
The above listed commands help you to find out the Windows Drive Letter that is going to require treatment. This is essential to understand the part of our Windows Drive Letter that requires the troubleshooting process.
Now Perform Bellow commands to fix :
- First Type D: (Note your driver letter may different) and hit the enter key.
- Perform bootrec /scanos command to scan your disk(s) for compatible installations, which can help it find your “missing” Windows installation.
- Type bootrec.exe /fixmbr hit enter to fix the master boot record.
- After that type bootrec.exe /fixboot hit to fix the boot device related problem.
- Now Use the command bootrec.exe /rebuildbcd and hit enter to scan again for Windows installations after the fixes.
When the commands finish running, restart your computer and see if the error code: 0xc0000225 happens again.
Set your Active Partition
By setting your active partition, you are telling your system where to boot from. However, for some reason, the active partition may switch to the wrong one, prompting the error code 0xc0000225 to appear. Thankfully, you can always change that and point your system to the right partition. Here are the steps:
- Again, you’ll need your Windows installation media to boot your system.
- Once you see the Windows Setup screen, select your preferred language and click Next.
- Click the Repair your Computer link at the bottom-left corner of the Install Now window.
- Open the Command Prompt via the Advanced Options menu by following this path:
Troubleshoot ->Advanced Options->Command Prompt
- Open the Disk Partition tool by running these commands one by one:
diskpart
list disk
- Once you’ve run these commands, you will see different Disk entries. It is likely that your hard drive is Disk 0. Run the following commands one at a time, replacing ‘X’ with the number of your HDD:
select disk X
list partition
Note: The second command allows you to see all the partitions on your internal drive.
- Run the following commands, replacing ‘X’ with the number of your partition:
select partition X
active
- Close Command Prompt, then boot your system normally. Check if the error 0xc0000225 has been resolved.
Disable Driver Signature Enforcement permanently
Also, Sometimes Driver signature enforcement can cause this type of problem. We recommend disabling the Driver signature enforcement once and start Windows. May this option work for you? To do this Access the command prompt from advanced boot options and type the below commands one by one and hit enter key.
bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
bcdedit -set loadoptions ENABLE_INTEGRITY_CHECKS
bcdedit /set testsigning off
If none above solutions work for you, access advanced options and perform a system restore. Pick a recent restore point and Windows will return to that point without affecting your personal files.
Did these solutions help to Fix error code 0xc0000225, your pc needs to be repaired to Windows 10. Let us know on the comments below, also read:
