Windows 10 Tips and How to Guide

Fix whea uncorrectable error 0x00000124 on Windows 10, 8.1 and 7

WHEA_UNCORRECTABLE_ERROR (Windows stop code 0x0000124) is a hardware error that is provided by the Windows Hardware Error Architecture (WHEA). There are several common causes for a WHEA_UNCORRECTABLE_ERROR (we’ll abbreviate it as WUE), most of which directly relate to your system hardware:

  • Corrupt hardware (Damaged hard drives, GPU, CPU, PSU, corrupt RAM, etc.)
  • Driver compatibility issues
  • Heat and voltage issues (Overclocking and voltage changes)
  • Corrupt Windows system files or registry files

Also, Misconfigured or outdated driver that causes conflicts in the I/O system, system file or a registry hive that is corrupt or missing or disk read/write errors, power outages or virus attacks cause

🙁 Your PC ran into a problem and needs to restart. We’re just collecting some error info, and then we’ll restart for you. (0% complete)

If you’d like to know more, you can search online later for this error: WHEA_UNCORRECTABLE_ERROR

Whea Uncorrectable error 0x00000124

If you are also suffering from this whea uncorrectable error 0x00000124, Here are Fallow bellow solutions to fix this permanently.

Disable Overclock in BIOS

The system overclocking caused due to the increase of heat. The most common fix for whea uncorrectable error is disabling overclock from your BIOS. To do that, just follow these steps.

Open Start Menu and go to Settings now Go to Update and Security, and then to the Recovery tab

Click on Advanced Startup and your computer will restart On advanced startup, Go to Troubleshoot.

Advanced options Windows 10

Then Advanced Options and then UEFI Firmware Settings and on next screen Click Restart After the computer is restarted, it should open BIOS automatically, so go Advanced tab Than to Performance, and look for Overclocking here Make sure overclocking is disabled

Save changes to BIOS (by pressing F10 on your keyboard), and start your computer normally
After disabling overclocking, you shouldn’t face this issue anymore, if it’s still present, check out the next solutions.

Fix Corrupted or Incompatible Device Drivers

Start Windows in Safe Mode and Check for Drivers. Sometimes Uncorrectable error can occur by corrupted device drivers. First, you have to identify which drivers are corrupted. to do this click in the search box in the start menu. Type in the search box “Device Manager” and press enter key.
when “Device Manager” is opened here you will find all active devices. You just have to find the device which is yellow marked.

That’s the infected device driver. You can update this from here by clicking the Update Driver Software option. If any device driver is incompatible then you can uninstall that driver and download it from the manufacturer website and install it.

Uninstall Any Recently Installed Application

If the error started to appear, immediately after you installed an application or install a new driver, then there is a chance that this new program could be causing the error. for this you have to uninstall the program, then evaluating your system.

First, ensure you have administrative rights to make changes or uninstall any application.
Let’s follow the steps to Do this. First, open Control Panel -> All Control Panel Items -> Programs and Features. Now select the recently installed Application and click uninstall. Restart windows and check. if you still your pc ran into a problem and needs to restart the Blue Screen problem in windows 10 follow the next step.

Check Corrupted Windows System Files

Sometimes The “whea_uncorrectable_error 0x00000124  Blue Screen” error may be due happen to a corrupted file system. To find corrupted registry files you just have to scan for it. First, Open the command prompt as admin. Type sfc/ scannow and press enter. Wait for completing the process.

system file checker utility Windows 10

This will scan your system for all its important system files, and replace where necessary. You just have to wait for few minutes to finish the scan. When the System file check and repair is completed, restart your computer and check if your computer works smoothly.

Use Memory Diagnostic to fix Memory ( RAM ) Errors

Sometimes Corrupted RAM can cause this whea_uncorrectable_error blue screen problem. so To determine whether or not this is the case, you need to test your RAM. This can be done, by running the Memory Diagnostic Tool 

Open the start menu and type Windows Memory Diagnostic and choose the app of similar name. Now select Restart now and check for problems.

It will restart your PC and diagnose your memory problems. Let the program finish and if any error is found, it will be reported. If this is the case, then it’s time to replace the erring memory module.

Scan and Check Hard Disk For Errors

If the problem persists, even after attempting all the above methods, then the problem could be due to a fault in your hard drive, bad sectors being the likely culprit. In order for you to determine whether or not you’re hard drive is damaged, you will need to scan it.

Press the shortcut key Win + X , and click on Command Prompt (Admin). In the command prompt window, type chkdsk c: /f /r command and press the Enter key.

Tip: CHKDSK is short of Check Disk, C: is the drive letter you want to check, /F means fix disk errors and /R stands for recover information from bad sectors.

check disk for errors windows 10

When it prompt “Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)”. Answer Yes to that question by pressing the Y key on your keyboard and press Enter. Restart your computer.

After restarting, the disk checking operation should start. Wait until Windows check your disk for errors. If you found error by checking hard disk and memory, You should try to fix them. There are many system optimizer tools available online. You can use anyone If you trust that program.

Check Corrupted Registry Files

To fix corrupted registry files you have to use a registry cleaner. There are lots of paid and free versions of registry cleaner on the internet. You can download any of them. You just have to click on registry clean button and this software will find and repair corrupted registry for you automatically.

Restoring Windows back to an earlier point in time

Restore Points proves to be very useful in situations like this. This method is only useful for you if you already have a Restore point Created in the past when your PC was Running Smooth as Butter. For those who already have a Restore point created, Check how to perform System restore on windows 10, 8.1,7.

Some Other Things to Take Care:

Sometimes WHEA UNCORRECTABLE ERROR can be caused by an internal hardware problem. In that case, here are the things you should do –

  • Open your CPU and clean it. Especially, It may have dust. Try to clean it carefully.
  • Remove your RAM and place it again.
  • Clean your cooling fan.
  • Clean hard disk.

Check This Video Steps Performed manually to fix whea_uncorrectable_error windows 10 BSOD error

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More