A simply Windows 10 Technology Blog.

Fix Your PC device needs to be repaired 0xc0000225

Some Times while starting your system windows could not start and show a Blue Screen error message like recovery your pc device needs to be repaired The Operating System Couldn’t Be Loaded Because A Critical System Driver Is Missing Or Contains ErrorsAs per the error message, we can easily understand that a system driver is causing the problem. And This happens because of a critical system file is missing or has become corrupted. It could also happen when the Boot Configuration file BCD is missing some required information or has become corrupted. When this error happens windows became unable to start.

So If you are also suffering from this error recovery your pc device needs to be repaired The operating system couldn’t be loaded because a critical system driver is missing or contains errors, message on your Windows 10 / 8 / 7 computer, Don’t worry Here This post We have some tips to Fix This Startup Error.

When This Error happens the First Step you have to note down the Error code which shown with this Error screen. The error codes are may different as.

0xc000000f – An error occurred while attempting to read the boot configuration data.

0xc000014C – The Boot configuration data for your PC is missing or contains errors.

0xc0000225 – Boot selection failed because a required device is inaccessible.

0x0000098, 0xc0000034 – Boot Configuration Data file missing required information or does not contain a valid OS entry.

Fix recovery your pc device needs to be repaired problem

Now After understand the eject error now let’s perform the steps to fix your device needs to be repaired windows 10  problem. First To fix such errors, make sure that you disconnect all external devices. Now Access Advanced Startup Options on Windows 10 or 8.1 To fix Startup errors.

Access  Advanced Startup Options

As per the error message, we can easily understand that a system driver is causing the problem. In such cases, we should perform the Automatic Repair by booting into System Recovery Options. In case the Automatic Repair fails, we can try this fix and let it work:

Advanced Startup Options is the central fix-it location for the entire operating system. From Advanced Startup Options, you can access Windows diagnostic and repair tools like Reset This PC, System Restore, Command Prompt, Startup Repair, and much more.

When Windows 10 isn’t loading on your PC or Due to This Error windows unable to start the system, then you can use the installation media to boot into the Windows Startup Settings.

Access Advanced boot options using installation media

First, insert the Bootable media into the system and  Start your computer with the installation media Now you will see press any key to boot from CD or DVD. press any key on the keyboard. here this will open your windows installation screen. here select language, time currency and keyboard input and click next on next screen Click Repair your computer.

windows 10 repair your computer
windows 10 repair your computer

Here Select Troubleshoot. Now windows will Represent you the Advanced Startup Options menu As shown below image.

Windows 10 Advanced Boot Options
Windows 10 Advanced Boot Options

Here Windows will represent different Troubleshooting tools to fix Startup problems like System Restore, Startup repair, Command prompt, system image Recovery, Startup Settings etc.

Perform Startup Repair

Now on Advanced options screen click on Startup Repair option. when you select startup repair this will restart the window and during startup, this will start to diagnose your system. During this diagnostic phase, Startup Repair will scan your system and analyze the various settings, configuration options, and system files as it looks for corrupt files or botched configuration settings. More specifically, Startup Repair will look for the following problems:

  1. Missing/corrupt/incompatible drivers
  2. Missing/corrupt system files
  3. Missing/corrupt boot configuration settings
  4. Corrupt registry settings
  5. Corrupt disk metadata (master boot record, partition table, or boot sector)
  6. Problematic update installation

If Startup Repair detects any of these types of problems, it will automatically attempt to fix them. If Startup Repair can fix the problem, it will do so without any intervention. It will then restart the system and boot normally. most of the time after performing Startup repair This  Error Your PC needs to be repaired windows 10 Startup Error gets solved. if you still having the same error after performing Startup Error then follow next Troubleshooting step.

Repair Corrupt boot Volume ( MBR )

If you get a message Windows 10 Automatic Repair couldn’t repair your PC  then leave it and open the command prompt. To open the command prompt Choose Troubleshoot > Advanced Options Select Command Prompt from the list of options now. When Command Prompt appears, enter the following lines and press Enter after each line in order to run it:

  1.   Diskpart
  2.   List volume
  3.   Exit
Fix corrupted Boot Volume using CMD
Fix corrupted Boot Volume using CMD

The above-listed commands help you to find out the Windows Drive Letter that is going require treatment. This is essential to understand the part of our windows Drive Letter that requires the troubleshooting process.

  1. D:  (You’re Windows Drive Letter)
  2. bootrec.exe /rebuildbcd
  3. bootrec.exe /fixmbr
  4. bootrec.exe /fixboot
  5. Exit

Now Type  Chkdsk command and hit the enter key to repair Bed Sector.

Repair Bed Sectors for Hard Disk

After fixing the Boot MBR check the hard disk for Errors. As we discuss the error is generated due to a corrupted hard disk. so first check your hard disk for errors Sometimes corrupted files on your hard drive can cause these types of errors to appear, but you can fix these errors by performing chkdsk scan. To perform this scan, Type: chkdsk /f /r 

Run chkdsk to fix Hard disk errors bed sectors
Run chkdsk to fix Hard disk errors bed sectors

Choose “Y” for yes for the question concerning would you like to force a dismount on this volume (Y/N)  when you press Y key this will show volume dismounted app opened handles to this volume are now invalid. and the scanning process will start to wait until stage 5 complete. this process will take some time wait for that . after complete the scanning process you will get a screen as shown below.

chkdsk scanning process advanced command prompt
chkdsk scanning process advanced command prompt

Now Type command Exit to exit the command prompt and when the advanced screen appear to click on turn off your pc. when you Start your system next time hope you didn’t face any Startup Error Your PC needs to be repaired windows 10. Check After perform this Step problem get solved. still having the same issue fallow next step.

Repair Corrupted system files ( System file checker tool )

System File Checker or SFC is a utility in Windows which allows users to scan and restore corruptions in Windows system files.The System File Checker or sfc.exe is a utility in Microsoft Windows located in C:\Windows\System32 folder. This utility allows users to scan and restore corrupt Windows system files.
To Run, this System file checker tool on same Advance Startup Screen click on the Command prompt When the command prompt opens type: sfc /scannow.

Run sfc utility on windows advanced startup
Run sfc utility on windows advanced startup

This will scan your system for all its important system files, and replace where necessary.  Wait until Windows scans and repairs system files. When the System file check and repair is completed, restart your computer and check if your computer works smoothly.

Perform System Restore 

If after performing all above methods Your PC needs to be repaired windows 10 Startup Error not solved then system Restore can fix your system by Revert back your system to the previous working state. you can perform the System Restore from Advanced startup options.

To perform System Restore First Access Advanced Startup Options Here Select the System Restore option.

When the Restore system files and settings open click on next Now on Restore your computer to the state it was in before the selected event screen select the Restore point date and click next.

On next screen When you click on finish this will prompt a screen “Once Started, System Restore cannot be interrupted. Do you want to continue ? ” click yes to confirm the System Restore.

This will start the system Restore Initializing window, Restoring files, Finalizing file Restore, Finishing Restore and Windows will Restore the windows. After restart windows will prompt a confirm message System Restored successfully.

Hope After performing this steps your problem will get solved.still have any query comment below.  Also, Refer Bellow video Steps Performed to fix Recovery Your PC needs to be repaired windows 10 Startup Error.

Visit and Subscribe my YouTube Channel for more Windows 10 videos.
These are some best working solutions to fix Windows 10 Startup problems include your device needs to be repaired windows 10, Operating System Couldn’t Be Loaded Because A Critical System Driver Is Missing Or Contains Errors, recovery your pc device needs to be repaired Blue Screen error. Also, Read Getting Windows ready Don’t turn off your computer Windows 10 Stuck

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. AcceptRead More