How to reset network settings in windows 10 1903 (Fix Common Internet problems)

Unable to Connect to the internet, Wi-Fi Disconnect frequently or No internet Access after windows 10 1903 Upgrade? Applied different solutions to troubleshooting network problems in windows 10, but still, there is No internet access? Basically, we recommend run built-in troubleshooter on Windows 10 can help you fix most of the common network & Internet issues. But if you are unable to solve one or more network issues using built-in troubleshooters, you should consider resetting network settings to default. Here this post explained how to reset network settings windows 10.

Before this, we recommend applying basic Network and internet troubleshooting steps.

  • Restart all your networking devices, include router and your PC,
  • Temporarily disable Antivirus or security software and remove VPN if configured on your system.
  • Make sure the latest windows updates installed on your system.
  • Perform Windows 10 clean boot to determine if any startup service conflict causing the problem.
  • Right click on network (WiFi) adapter icon and select Troubleshoot problems. Follow on-screen instruction and restart windows after complete the process. Check if this helps.
  • Also, try reinstall driver for network/WiFi adapter. If none above solutions worked for you, then you can consider reset network settings windows 10. Here apply solutions below.

Reset Network Settings in Windows 10

Network reset can be considered As “hard reset” solution for solving most of the network issue. When you perform network reset option this will reinstall all network adapters and set other networking components to their default settings.

Note: Perform network reset will forget all Wi-Fi networks and their passwords. That means after resetting network settings, you will need to manually connect your Laptop to a Wi-Fi network again by entering the password. So, if you don’t remember the Wi-Fi password that your PC regularly connect to, you should know or backup the saved Wi-Fi password before resetting network settings.

Perform Network Reset from settings

Note: Network Reset Option Available on Windows 10 only, If you are windows 7 or 8.1 user looking for reset network settings jump to next step.

  • Press Windows + I keyboard shortcut to open the Settings app,
  • Here click on “Network & Internet” then “Status” on the left.
  • Scroll Down, You’ll find an option on the right called “Network reset.” Click on it.

  • The Settings app will open a new window called Network Reset

Make sure to read all the parts in this screen so you know what’s about to happen. Notably, Your pc will be Restarted itself, so make sure you have everything saved and ready to shut down.

  • Click the “Reset now” button when you’re ready.

  • The Network Reset Confirmation popup will appear,
  • Click Yes to confirm the same and Reset the Network Settings to the default setup.

  • This Will Take Flew minute to Perform the Reset process,
  • Then After A prompt message will open you’re about to be signed out.

After the restart, your PC will have its network drivers and settings reset. Allow Windows to reinstall drivers or install them manually if you like. Once you’re set back up, try to connect again and see if the reset helped fix your issues.

Note: After network reset, Your Wifi Connection will be get disconnected, So you need the Wifi Password to Connect again. Also your network connection could be set to public network mode. Therefore the PC is not discovered by other devices in the network. So to make it discoverable edit the adapter properties and turn on the switch under Make this PC discoverable. If you are using VPN client software or virtual switches, even they have to be reconfigured again.

Reset network settings using cmd

If you are using Windows 7 or 8.1 computer then There is no option to Reset Network configuration.  You Can Reset Network Settings To Default by using some commands.

Note: command below also applicable to reset network settings windows 10 using cmd.

First search for Command Prompt, Right click and select As an administrator,

Now perform Command below one by one and press enter key after each.

  • netsh winsock reset
  • netsh int ip reset
  • ipconfig /release
  • ipconfig /renew
  • ipconfig /flushdns

That’s all After performing The commands simply Restart windows, to take effect the changes you have made. Now Check All Internet or network Related problems are get solved.

Read more:

Completely Reset Network Settingsnetwork reset windows 10 cmdreset all network settings windows 7reset network settings in Windows 10reset network settings windows 10reset network settings windows 10 command linereset network settings windows 8reset your wireless network adapterwindows 10Windows 10 April 2018 Updatewindows 10 network reset not workingwindows 10 version 1803
Comments (1)
Add Comment
  • Justin

    What About very slow connection after the 1903 update? I have 1Gbps internet that worked perfectly until the computer installed 1903. now i get about 300-360Mbps, real data is even slower at about 50Mbps . I tested the hardware by loading Linux from a bootable USB and i get a full 1Gbps just like i should. and real data, tested with a 50GB Game downloaded at 120MB/s or ~ 960Mbps. but with windows 1903 this i go down to about 6.2MB/s or ~50 Mbps with the exact same source being tested. also I have a LOT of packet loss when using windows. I even Bought a PCI-E NIC thinking the chipset went bad or just something with the hardware was being weird, but the new NIC acts EXACTLY the same way. is there a solution to this?