When you try to install Windows 10 1909, also known as ‘Windows 10 November 2019 update’ The Update fails to install error 0x80080008, 0x80d02002, 0x80242006 or the update downloading procedure is stuck. There are several reasons behind this problem, “Feature update to Windows 10 version 1909 failed to install ” might be due to corrupt Windows Update components, or third-party software conflicts etc. Here every possible solution to fix windows 10 Feature update installation problems.
Post Contents :-
Windows 10 version 1909 failed to install
Cause 01: When the download of windows 10 November 2019 update Version 1909 is completed, Windows asks to restart the system to install the update. After the system’s restart, the Windows 10 1909 is not installed and at the Update history you receive the following error: “Feature update to Windows 10, version 1909: Failed to install…” (error: 0x80080008)
Cause 02: After checking for new updates, Windows is starting to download the November 2019 Update for Windows 10 version 1909, but during the Downloading Updates operation, is stuck at xx% (e.g. at 85% or 99%) with error 0x80d02002.
- First, make sure you have a stable internet connection To download windows updates from Microsoft server.
- Run Third-party system optimizer like Ccleaner to Cleanup Disk space by removing temp, system error, memory dump files, And fix broken registry error.
- Run System File Checker utility to make sure any corrupted system files not causing the issue.
- Also, Run DISM command DISM.exe /Online/Cleanup-image/Restorehealth to repair system image.
- Temporarily uninstall Antivirus and Disconnect from VPN if configured.
Run Windows Update Troubleshooter
Microsoft has developed Windows Update Troubleshooter which analyzes your system particularly the windows update module and troubleshoots problems. We recommend, first Download the Windows Update Troubleshooter from the official Microsoft website. Run the update troubleshooter and let windows to check and fix the problem itself. After complete, the process Restart windows and try to download and install windows update.
Also, you can run the build in Windows update troubleshooter following steps below.
- Press Windows + I to open Settings
- Update & security
- Click on Windows update.
- Run the troubleshooter as shown image below.
This will check for problems prevent feature update to install properly and try to resolve them itself only. Wait until complete the troubleshooting process, after that restart windows and again check for windows update. This time Get success? let us know If you still need help fallow the next solution.
Turn off Windows Firewall
- Press Windows Key + R, Type Firewall.cpl and Click OK.
- Click on “Turn Windows Defender Firewall On or Off”.
- In Private network Setting, select “Turn off Windows firewall (not recommended)”
- Do the same for Public Network Setting, Press OK.
Note: After the issue is resolved you must turn the Windows Firewall on.
Disable any installed Antivirus/Malware/Adware Program Temporarily:
Sometimes Antivirus/Malware/Adware programs mark Microsoft Windows installer files as Spam and block it from installing. Refer your vendor’s website for disabling it temporarily. Once windows update installation is done you can activate it again.
Updating Time, Region and Language Settings
Normally Windows syncs your time according to the time zones automatically. If you have an incorrect time zone, it is likely to cause problems such as failure to install windows update.
- Open windows settings
- Time & Language then date & time.
- Check if your date and time are set correctly.
- If not, uncheck the options which say “set time automatically”
- Here “set timezone automatically”.
- Then click “Change” underneath Change date and time.
- Set your time accordingly and also select your appropriate time zone.
- Also, disable “Auto-sync time”.
- Again form Region & language try using English United Kingdom/US.
Perform a clean boot
If these methods still don’t help, we recommend you to perform a clean boot to eliminate the influence of the 3rd party software and check again.
Reset Windows update components
If all the above methods failed to fix Then reset Windows update components is probably a good fix. That restart Windows update and its related services, And clear old update files. So next time force windows update to download fresh files from Microsoft server.
Open Command prompt as administrator and perform command below one each after one.
- net stop wuauserv
- net stop cryptSvc
- net stop bits
- net stop msiserver
Above commands stop Windows update and its releatd services.
- Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
- Ren C:\Windows\System32\catroot2 Catroot2.old
These two commands rename the SoftwareDistribution folder, where windows update store update files. By rename, this folder Windows update creates a new one and download fresh update files from the Microsoft server.
- net start wuauserv
- net start cryptSvc
- net start bits
- net start msiserver
Above commands restart the services that we previously stopped.
Close Command Prompt and Restart your computer.
- Now Open Windows settings app,
- Click update & security then Windows update,
- hit the check for update button and check if Windows 10 version 1809 available to download,
Use Windows 10 update assistant
If all above methods failed to fix then simply download the “Windows Update Assistant” from Microsoft website. Run the upgrade assistant click the Update Now button and follow the on-screen prompts to install the Update or manually upgrade to windows 10 V1909.
- Windows 10 Version 1903, May 2019 Update released Here how to get it right now!
- New features introduced on Windows 10 October 2018 Update Version 1809!
- How to Rollback or uninstall windows 10 1903, May 2019 update
- 15 Tips to Optimize Windows 10 1903 for better performance
- How to extend the 10 day limit to go back to your previous version of Windows
- Windows 10 Version 1903 ISO Direct Download links (May 2019 Update)