When you try to install the Windows 10 Update 1803, also known as ‘windows 10 April 2018 update’: The Update fails to install error 0x80080008, 0x80d02002, 0x80242006 or the update downloading procedure is stuck. There are several reasons behind this problem, “Feature update to Windows 10 version 1803 failed to install ” might be due to corrupt Windows Update components, or third-party software conflicts etc. Here every possible solution to fix windows 10 Feature update installation problems.
Post Contents :-
- 1 Issue: Feature update to Windows 10 version 1803 Failed to install
Issue: Feature update to Windows 10 version 1803 Failed to install
Cause 01: When the download of windows 10 April 2018 update Version 1803 is completed, Windows asks to restart the system to install the update. After the system’s restart, the Fall Creator Update is not installed and at the Update history you receive the following error: “Feature update to Windows 10, version 1709: Failed to install…” (error: 0x80080008)
Cause 02: After checking for new updates, Windows is starting to download the Fall Creators Update for Windows 10 version 1803, but during the Downloading Updates operation, is stuck at xx% (e.g. at 85% or 99%) with error 0x80d02002.
First, make sure you have a stable internet connection To download windows updates from Microsoft server. Also, Run Third-party system optimizer like Ccleaner to Cleanup Disk space by removing temp, system error, memory dump files, And fix broken registry error. Run System File Checker utility to make sure any corrupted system files not causing the issue. Also, Run DISM command DISM.exe /Online /Cleanup-image /Restorehealth to repair system image.
Run Windows Update Troubleshooter
Microsoft has developed Windows Update Troubleshooter which analyzes your system particularly the windows update module and troubleshoots problems. We recommend, first Download the Windows Update Troubleshooter from the official Microsoft website. Run the update troubleshooter and let windows to check and fix the problem itself. After complete, the process Restart windows and try to download and install windows update.
Turn off Windows Firewall
Press Windows Key + R, Type Firewall.cpl and Click OK. Click on “Turn Windows Defender Firewall On or Off”. In Private network Setting, select “Turn off Windows firewall (not recommended)”
Do the same for Public Network Setting, Press OK.
Note: After the issue is resolved you must turn the Windows Firewall on.
Disable any installed Antivirus/Malware/Adware Program Temporarily:
Sometimes Antivirus/Malware/Adware programs mark Microsoft Windows installer files as Spam and block it from installing. Refer your vendor’s website for disabling it temporarily. Once windows update installation is done you can activate it again.
Updating Time, Region and Language Settings
Normally Windows syncs your time according to the time zones automatically. If you have an incorrect time zone, it is likely to cause problems such as failure to install windows update. Open windows settings Time & Language -> date & time.
Check if your date and time are set correctly. If not, uncheck the options which say “set time automatically” and “set timezone automatically”. Then Click “Change” underneath Change date and time. Set your time accordingly and also select your appropriate time zone. Also, disable “Auto-sync time”. Again form Region & language try using English United Kingdom/US.
Perform a clean boot
If these methods still doesn’t help, we recommend you to perform a clean boot to eliminate the influence of the 3rd party software and check again.
Reset Windows update components
If all above methods failed to fix simply perform command below to reset the windows update components. To do this open administrative Command Prompt and type following commands one-by-one followed by Enter key.
net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver
Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
Ren C:\Windows\System32\catroot2 Catroot2.old
net start wuauserv
net start cryptSvc
net start bits
net start msiserver
Close Command Prompt and Restart your computer. After the restart, go to Start > Settings > Update & Security. Check for updates and install them.
Download and install the Windows 10 v1803 Update Manually.
If all above methods failed to fix then simply download the “Windows Update Assistant” from Microsoft website. Run the upgrade assistant click the Update Now button and follow the on-screen prompts to install the Update or manually upgrade to windows 10 V1803.
These are some most applicable solutions to fix Feature update to Windows 10 version 1803 failed to install, windows update installation stuck, update installation failed with error 0x80080008, 0x80d02002 etc. Still. need any help feel free to discuss in comments below, Also Read 5 Tweaks to fix windows 10 slow boot or startup problem.